manualshive.com logo in svg

Agilent Technologies All, Catalog

Share
Download
Agilent Technologies All Catalog Download Page 96

143

3

E7415A
11945A
11940A
11941A
Various
EMC
Accessories

EMC Development Products and Accessories

EMI/EMC Test Systems

English URL 

www.agilent.com/find/products

PC Software for the E7400A Series

IntuiLink PC software provides easy transfer of EMC measurement
trace data directly into MS Excel spreadsheets or screen images
into MS Word documents for analysis, archiving, presentations, 
or printing. Transfer measurement results over GPIB, RS232, or
LAN (using an E2050A GPIB/LAN adapter). Save and  restore
analyzer states. Unattended operation with repetitive sequence of
measurement transfers by date and time. IntuiLink is included
standard with GPIB and RS232 options.

E7415A EMI Measurement Software

Choose the level of automation you need, from simple data capture
from your EMC analyzer or receiver to fully automated EMI measure-
ments. With the E7415A, you can select the measurement resolution
over the span of interest or use the auto-select feature. 

Zoom in on an area for a closer look simply by dragging a cur-

sor. Point and click to mark individual signals and add them to a list
or use the “Add Peaks to List” function to add all the signals above a
limit or margin to a list with one click. Highlight signals in the list to
measure peak, quasi-peak and average amplitude or tune and listen.

Generate a report by selecting from a wide range of entries.

Your report may include a graph, limit lines, equipment table,
transducer factors etc. 

The E7415A controls the E7400A Series EMC analyzers as well

as the 8590EM Series EMC analyzer and 8546A/42E EMI receivers. 

11940A and 11941A Close-Field Probes and 

11945A Close-Field Probe Set

These handheld probes are designed to measure magnetic-field
radiation from surface currents, slots, cables, and ICs for EMC diag-
nostic and troubleshooting measurements. Their unique design
results in a high level of electric-field rejection. This significantly
reduces errors, thus allowing calibrated and repeatable measure-
ments.

The 11941A operates from 9 kHz to 30 MHz, the 11940A, from

30 MHz to 1 GHz. Five antenna factors appear on each probe for cal-
culating absolute magnetic-field strength (dBµ A/m) from the dBµV
reading of a spectrum analyzer. Each probe is calibrated and comes
with a 2-meter RG-223 coaxial cable, and SMA(f)-to-type-N(m)
adapter, and an SMA (f)-to-BNC(m) adapter.

The 11945A close field probe set includes both the 11940A and

11941A probes for full coverage from 9 kHz to 1 GHz. Option E51
adds the 11909A preamplifier, with a 36-inch (914-mm) type-N cable,
and a carrying bag for storage and protection of the entire set.

119XX Series Antennas

These antennas are individually calibrated and shipped with a cal-
ibration certificate showing actual performance data. The series
includes the following products:

Model

Frequency Range

11955A Biconical 

Antenna

1

30 to 300 MHz

11956A 

Log Periodic Antenna

1

200 MHz to 2 GHz

11966E 

Double-Ridged Waveguide Horn Antenna

1 to 18 GHz

11966J 

Double-Ridged Waveguide Horn Antenna

18 to 40 GHz

11966L 

Coax Cable, Type-N

10 m

11966P 

Broadband Antenna

30 MHz to 2 GHz

1

Typical cal factor supplied.

These antennas may be ordered directly from ETS Lindgren
(

www.ETS-Lindgren.com

). The E7400A Series EMC Analyzers will also

work with most third party antennas, LISNs, and other EMC 
accessories.

11967D Line Impedance Stabilization Network

Used for commercial conducted measurements. Maximum current 
10 amps. Includes options for SCHUKO, NEMA, and British power
outlet connectors.

11974A Transient Limiter

A Transient Limiter protects the EMC analyzer’s input from damage
caused by high-level transients. The 11974A is recommended for use
with LISN device. 

11909A Preamplifier

Improve receiver, sensitivity for more accurate radiated emissions
measurements. This amplifier has 32 dB gain with a 1.8 dB noise fig-
ure. This amplifier is ideal for use with the 11940A and 11941A close
field probes to detect low level signals from device-under-test.
Frequency range is 9 kHz to 1 GHz. 

8449B Microwave Preamplifier

This high-gain, low-noise preamplifier adds sensitivity for 
MIL-STD radiated measurements. Frequency range is 1 to 26.5 GHz.

Key Literature

E7400A Series EMC Analyzer Brochure, p/n 5968-2516E
ESA/EMC Configuration Guide, p/n 5968-3412E
E7400A Series Technical Specifications, p/n 5968-3662E
EMC Precompliance Systems and Accessories Catalog, p/n 5988-3290EN
EMC Precompliance Cookbook (AN 1328), p/n 5968-3661E

Summary of Contents for All
































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands