manualshive.com logo in svg

Agilent Technologies All, Catalog

Share
Download
Agilent Technologies All Catalog Download Page 116

163

3

E5100A

High-Speed Network Analyzers, 10 kHz to 300 MHz

Network Analyzers

English URL 

www.agilent.com/find/products

E5100A Network Analyzers

The E5100A network analyzer is a 10 kHz to 300 MHz network
analyzer best fitted for production lines of electronic component
manufacturers, especially resonator and filter manufacturers, who
require extra-high throughput.

The E5100A improves production line productivity with its fast

measurement speed (fastest sweep speed is 0.04 ms/point), fast
waveform analysis commands, and speedier processor. It provides
faster measurements with lower fluctuations because of its low-
noise performance and fine selection IFBW.

High-Quality and High-Speed Tests

The E5100A is a versatile network analyzer with many functions
and options to fit your needs with a minimum investment. During
final tests, both precision and high speed are required for better
yield and better productivity. The E5100A makes high-quality and
high-speed tests with its fine IFBW selection and low-noise circuitry.
Its convenient analysis and processing functions improve the 
productivity of the final test processes.

Specifications

Source Characteristics

Option 000

Option 600

Frequency Range

10 kHz to 300 MHz

10 kHz to 300 MHz

Number of RF 

1

2 (Power Splitter inside)

Output Port

Power Range

–48 to +22 dBm

–52 to +18 dBm (OUT 1)
–65 to +5 dBm (OUT 2)

Power Resolution

0.1 dB

0.1 dB

Probe Power Supply

Installed

None

Receiver Characteristics

Option 000

Option 600

Frequency Range

10 kHz to 300 MHz

10 kHz to 300 MHz

IFBW

10 Hz to 30 kHz 

10 Hz to 30 kHz 

(1, 1.5, 2, 3, 4, 5, 8 steps)

(1, 1.5, 2, 3, 4, 5, 8 steps)

Number of Ports

4

2

System Dynamic Range

>120 dB (IFBW = 1 kHz)

>120 dB (IFBW = 1 kHz)

at Test Port

Dynamic Accuracy

±0.05 dB, ±0.3 deg

±0.05 dB, ±0.3 deg

Input Impedance 

50 

Ω

50 

Ω

(nominal)

Measurement Speed

0.04 ms/point

0.04 ms/point

(IFBW = 30 kHz, 

(IFBW = 30 kHz, 

ramp-sweep)

ramp-sweep)

Phase Tracking 

Installed

Installed

DLD Function

Evaporation Monitor 

Installed

Installed

Function

General Characteristics

Measurement Parameters:

Gain (Amplitude Ratio), Phase, Group-Delay,

Amplitude, Gain-Phase, Gain-Delay, Impedance, Admittance

Display:

6.5 inch TFT Color LCD

Programming:

IBASIC

• 10 kHz to 300 MHz
• 0.04 ms/point measurement speed
• Fine resolution IFBW
• List sweep function
• Stable measurements
• High-speed evaluation using the waveform analysis commands
• Evaporation Monitoring Function
• Phase Tracking Function
• Supports active probes (Option)
• GP Instrument BASIC for easy automation

E5100A

Mass Storage:

FDD and internal non-volatile memory

Parallel I/O Port:

TTL, 16-bit output, 8-bit input/output (standard)

Power Requirement:

90 to 132 V or 198 to 264 V, 47 to 63 Hz, 400 VA max.

Size:

177 mm H x 425 mm W x 425 mm D (7.08 in x 17 in x 17 in)

Weight:

12 kg (26.4 lb) (typical)

Accessories

41901A SMD PI-Network Test Fixture

The 41901A SMD PI-network test fixture produces the capability 
to measure surface-mount crystal resonator using the E5100A.
Attachment kit (option) is required for measurement. The frequency
range of the 41901A is 1 MHz to 300 MHz.

Key Literature

E5100A Network Analyzer Product Overview, p/n 5968-1873E
E5100A Technical Specifications, p/n 5966-2888E

Ordering Information

E5100A

Network Analyzer

E5100A-000

300 MHz 4-Receivers Standard Test Set

(with mandatory options 801, 400, 706 and 804)

E5100A-600

300 MHz 2-Receivers X’tal Resonator Test

w/PI-network (incompatible with E5100A-801, 400 and 706)

E5100A-801

Power Extended One RF OUT Port

E5100A-400

300 MHz 4-Receivers with Ports R, A, B and C

E5100A-706

Type-N 50 

Ω

Input Connector on Ports A and B

E5100A-804

Parallel I/O Standard

E5100A-006

Parallel I/O Mode B

E5100A-800

Standard Frequency Reference 

E5100A-1D5

High Stability Frequency Reference

E5100A-1F0

PC Style Keyboard – U.S Version

E5100A-1CM

Rackmount Kit

E5100A-1CN

Handle Kit

E5100A-1CP

Rackmount and Handle Kit

E5100A-ABA

English Localization

E5100A-ABJ

Japanese Localization

Accessories
41800A

Active Probe

41802A

1 M

Ω

Input Adapter

41901A

SMD PI-Network Test Fixture

41901A-010

to 

41901A-061

Attachment Kit

11667A

50 

Ω

Power Splitter

87512A

Transmission/Reflection Test Kit

Summary of Contents for All
































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands