Agilent Technologies All Catalog Download Page 75

Page: 75 / 223

122

N9010A

Economy Signal Analyzer, EXA (cont.)

Signal Analysis

English URL

www.agilent.com/find/products

Enhanced Standard Features

Auto Tune

At the press of a button, the analyzers center frequency adjusts to
the strongest signal in the tunable span of the analyzer, changes the
span to three times the occupied bandwidth of the signal, sets the
resolution and video bandwidth, optimizes the reference level,
performs a peak search, sets a maker on the peak, and displays the
measurement result. This is a patented Agilent exclusive feature.

Advanced Markers and Traces

Determine the precise value at each trace point quickly with the
advance marker capability. Twelve independent markers, based on
frequency or position, can be set as a reference for any other marker.
Band marker enables easy setup for power ratio measurements and
results can be viewed on the marker table. Display up to six traces,
in the same display window, each with independent detectors.

Built in Help

Instead of searching through hundreds of pages in a manual, just
press Help key to evoke comprehensive help system inside the EXA –
any key, any menu, anytime. This includes handy SCPI programming
commands.

Time Gating

Analyze time varying signals such as WiMAX, pulsed RF, time divi-
sion multiple access (TDMA), interleaved and burst-modulated with
time gating capability. The Agilent EXA offers three types of Time
Gating: Gated LO (or Gated sweep), Gated Video and Gated FFT.
• Gated LO offers the fastest Time Gating measurement for full

span of frequency

• Gated FFT offers the fastest Time Gating measurement within

the span of analysis bandwidth (10 MHz)

• Gated Video offers the backward compatibility with Agilent ESA,

856x and 859x series spectrum analyzers

List Sweep

Save measurement time by programming the EXA analyzer for fast
power measurements using the list sweep feature. Remotely extract
amplitude values at known frequencies by making a list of single-
point measurements in advance. The EXA can run through the mea-
surements without requiring you to reset the analyzer for any
iteration of a measurement cycle.

MATLAB

Agilent supports MATLAB driver officially allowing you to run
MATLAB and 89601A VSA, which are the two most popular soft-
ware products for system designers in the wireless communication
industry. Agilent also provides sample programs at:

www.agilent.com/find/matlab_sa

Advanced Measurement Applications

Please see the measurement application section on page 123 for
standards based, one-button measurement applications such as:
phase noise, noise figure, analog demodulation, WiMAX, GSM/Edge,
cdma2000, and W-CDMA. These advanced measurements applica-
tions can be used on the economy class EXA or our mid range MXA.

Specifications

For full specification information please see

www.agilent.com/find/exa

Key Literature & Web Link

www.agilent.com/find/exa

Ordering Information

Instrument
N9010A

MXA Signal Analyzer

(includes spectrum analyzer measurement application)

N9010A-503

Frequency Range, 9 kHz to 3.6 GHz, non-upgradeable

N9010A-507

Frequency Range, 9 kHz to 7.0 GHz, non-upgradeable

N9010A-513

Frequency Range, 9 kHz to 13.6 GHz, non-upgradeable

N9010A-526

Frequency Range, 9 kHz to 26.5 GHz, non-upgradeable

N9010A-PRC

Portable configuration, upgradeable

Performance Options

N9010A-PFR

Precision Frequency Reference, upgradeable

N9010A-EA3

Electronic Attenuator, 3.6 GHz, upgradeable

N9010A-FSA

Fine Step Attenuator, upgradeable

N9010A-P03

Preamplifier, 3.6 GHz, upgradeable

Accessories

N9010A-EFM

USB Flash Drive, 512 MB, upgradeable

N9010A-DVR

USB DVD-ROM/CD-R/RW Drive, upgradeable

N9010A-MSE

Mouse, USB Interface, upgradeable

N9010A-KYB

Keyboard, USB Interface, upgradeable

N9010A-MLP

Minimum Loss Pad, 50 to 75 ohms (Type N to BNC),

upgradeable

N9010A-CVR

Front Panel Protective Cover, upgradeable

N9010A-HTC

Hard Transit Case, upgradeable

N9010A-1CP

Rack Mount Kit with Handles, upgradeable

N9010A-1CN

Front Handle Kit, upgradeable

N9010A-1CM

Rack Mount Kit, upgradeable

N9010A-1CR

Rack Slide Kit, upgradeable

Measurement Applications
(can also be used on the MXA midrange signal analyzer)
N9075A

WiMAX 802.16-OFDMA Measurement Application, upgradeable

N9073A-1FP

W-CDMA Measurement Application, upgradeable

N9073A-2FP

HSDPA/HSUPA Measurement Application (requires 1FP),

upgradeable

N9068A

Phase Noise Measurement Application, upgradeable

89601A

89601A Vector Signal Analysis (VSA) Software, upgradeable

Warranty and Service

Standard warranty is one year

R-51B-001-3C

1 year return-to-Agilent warranty extended to 3 years

Calibration (Options not available in all countries)
R-50C-011-3

Inclusive calibration plan, 3 year coverage

R-50C-013-3

Inclusive calibration plan and cal data, 3 year coverage

Summary of Contents for All
































































































































































































































Search results

Summary of Contents for All

Reviews:

Brands by name

Popular brands

Agilent Technologies All, Catalog

Search results

Summary of Contents for All

Reviews:

Brands by name

Popular brands