manualshive.com logo in svg

Agilent Technologies All, Catalog

Share
Download
Agilent Technologies All Catalog Download Page 168

215

3

English URL 

www.agilent.com/find/products

N2100A

English URL 

www.agilent.com/find/products

PXI Digital Communications Analyzer 7 GHz

Optical/Transmission

Accessories

The N2100A requires: A PXI mainframe with either a PXI embedded 
controller or a PXI interface card to connect to an external PC

Key Literature & Web Link

Agilent 7 GHz Digital Communications Analyzer Data Sheet , 
p/n 5989-6070EN
Agilent 5 Gb/s Bit Error Ratio Tester Data Sheet, p/n 5989-6069EN
Agilent PXI 8.5 Gb/s Pulse Pattern Generator Data Sheet, 
p/n 5989-6071EN
Agilent PXI Synthesizer Data Sheet, p/n 5989-6071EN

www.agilent.com/find/pxit

Ordering Information

N2100A-H10

7 GHz Optical Bandwidth DCA. Equipped with compliance

filters suitable for 1GbE, 2x and 4x Fibre Channel. 9 GHz single ended 
electrical input. 3 slot PX card, requires PXI mainframe and controller sold
separately.

1

The N2100A is not recommended for use at 3.125 Gb/s with a PRBS-7 pattern.

2

Consult factory for alternative options.

• Cost effective DCA for optical transceiver manufacturing
• Flexible Modular PXI platform allows multiple instruments 

and configurations 

• Significantly smaller than a traditional DCA
• Eye diagram, jitter and mask testing
• High throughput
• Multimode and single-mode fiber input
• Single ended electrical input
• Three standard hardware filter rates GigE, 2xFC, 4xFC 
• Digital filter capability
• Multiple measurement capability
• Unique vector sampling technique

The N2100A implements a patented coherent vector under-sampling
which allows fast data acquisition and multiple eye measurements
for higher test throughput. 

This PXI instrument uniquely combines the functionality of

several traditional instruments in a single PXI module. Perform
accurate eye diagram analysis to characterize the quality of trans-
mitters from 50 Mb/s to 4.25 Gb/s.

The N2100A is part of a family of Agilent PXI products that are

focused on providing test equipment for optical transceiver manu-
facturers. 

Optical transceiver manufacturers can measure all required

test parameters by combining the N2101A 5 Gb/s BERT with the
N2100A Digital Communication Analyzer.

Other related PXI products:

N2099A

PXI Synthesizer

N2101A

PXI Bit Error Ratio Tester

N2102A

PXI 8.5 Gb/s Pulse Pattern Generator

Specifications

Electrical

1

Bandwidth of Electrical Input:

0.1 to 7000 MHz (characteristic)

Internal Clock Recovery:

155 to 3000 MHz

Clock Recovery Lock Range:

250 ppm

External Clock Reference:

5 to 300 MHz

External Clock Input Range (CML):

200 to 3000 mV

External Clock Lock Range:

±150 ppm

Transition Time (20% to 80%):

35 pS

Maximum Input Range (p-p):

1500 mV

Input noise (rms):

0.75 mV

Optical

1

Standard Switchable Filters:

1.25, 2.125, 4.25 Gb/s compliance filters

2

Unfiltered Optical BW: 

7.0 GHz

Optical Responsivity:

780 – 1600 nm

Optical Noise Equivalent Power:

–28 dBm

Mask Sensitivity at 850 nm:

–10 dBm

Mask Sensitivity at 1310/1550 nm:

–12 dBm

Overload Optical Input:

2 dBm

Average Optical Power Monitor:

–15 to 2 dBm

Fiber Input:

9, 50, 62.5 µm

Summary of Contents for All
































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands