Agilent Technologies All, Catalog

Page: 55 / 223

102
3
E4443A
E4445A
E4440A
E4447A
E4446A
E4448A
English URL www.agilent.com/find/products
High Performance Spectrum Analyzers, PSA Series (cont.)
Signal Analysis
Frequency Specifications
Frequency Range
E4443A (DC coupled) 3 Hz to 6.7 GHz
(AC coupled) 20 MHz to 6.7 GHz
E4445A (DC coupled) 3 Hz to 13.2 GHz
(AC coupled) 20 MHz to 13.2 GHz
E4440A (DC coupled) 3 Hz to 26.5 GHz
(AC coupled) 20 MHz to 26.5 GHz
E4447A (DC coupled) 3 Hz to 42.98 GHz
E4446A (DC coupled) 3 Hz to 44 GHz
E4448A (DC coupled) 3 Hz to 50 GHz
Band Harmonic
Mixing Mode (N)
0 1– 3 Hz to 3 GHz
1 1– 2.85 GHz to 6.6 GHz
2 2– 6.2 GHz to 13.2 GHz
3 4– 12.8 GHz to 19.2 GHz
4 4– 18.7 GHz to 26.8 GHz
5 4+ 26.4 GHz to 31.15 GHz
6 8– 31.0 GHz to 50.0 GHz
Frequency Reference
Accuracy ±[(time since last adjustment x aging rate) +
temperature sta calibration accuracy]
Aging rate ±1 x 10 -7 /year
Temperature stability ±1 x 10 -8 (20°C to 30°C)
±5 x 10 -8 (0°C to 55°C)
Calibration accuracy ±7 x 10 -8
Frequency Readout Accuracy (start, stop, center, marker)
±(marker frequency x frequency reference ac 0.25 percent
x span + 5 percent x RBW + 2 Hz + 0.5 x horizontal resolution*)
*Horizontal resolution is span/(sweep points –1)
Marker Frequency Counter
Accuracy ±(marker frequency x frequency
reference ac 0.100 Hz)
Delta counter accuracy ±(delta frequency x frequency
reference ac 0.141 Hz)
Counter resolution 0.001 Hz
Frequency Span (FFT and swept mode)
Range 0 Hz (zero span), 10 Hz to maximum frequency
of model
Resolution 2 Hz
Accuracy ±[0.2 percent x span + span/(sweep points –1)]
Sweep Time and Triggering
Range
Span = 0 Hz 1 µs to 6000 s
Span ≥ 10 Hz 1 ms to 2000 s
Accuracy
Span ≥ 10 Hz, sweep ±0.01 % nominal
Span
≥
10 Hz, FFT ±40 % nominal
Span = 0 Hz ±0.01 % nominal
Trigger Free run, line, video, RF burst, external front,
external rear
Trigger delay
Span = 0 Hz, or FFT –150 ms to +500 ms
Span ≥ 10 Hz, swept 1 µs to 500 ms
Resolution 0.1 µs
Sweep (trace) Point Range
Span = 0 Hz 2 to 8192
Span ≥ 10 Hz 101 to 8192
Gated FFT
Maximum span 10 MHz
Delay range –150 to +500 ms
Delay resolution 100 ns or 4 digits whichever is more
Gate duration 1.83/RBW ±2 % nominal
Gated Sweep
Span range Any span
Gate length range 10.0 µs to 500.0 ms
Gate Delay range 0 to 500.0 ms
Resolution Bandwidth (RBW)
Range (–3.01 dB bandwidth) 1 Hz to 3 MHz (10 % steps), 4, 5, 6, 8 MHz
Bandwidth accuracy (power):
RBW range:
1 Hz to 51 kHz
±0.5 % (±0.022 dB)
56 kHz to 100 kHz ±1.0 % (±0.044 dB)
110 kHz to 240 kHz ±0.5 % (±0.022 dB)
270 kHz to 1.1 MHz (<3 GHz CF) ±1.5 % (±0.044 dB)
1.2 MHz to 2.0 MHz (<3 GHz CF) ±0.07 dB nominal
2.2 MHz to 6.0 MHz (<3 GHz CF) ±0.02 dB nominal
Bandwidth accuracy (–3.01 dB):
RBW range 8 MHz (<3 GHz CF) ±15 % nominal
Selectivity (–60 dB/–3 dB) 4.1:1 nominal
EMI Resolution Bandwidths
CISPR family 200 Hz, 9 kHz, 120 kHz, 1 MHz
MIL STD family 10 Hz, 100 Hz, 1 kHz, 10 kHz,
100 kHz, 1 MHz
Analysis Bandwidths
Maximum FFT width 10 MHz
80 MHz, 14 bit ADC (E444xA-122),
40 MHz, 14 bit ADC (E444xA-140)
I/Q waveform digital output
bandwidth
10 MHz (E444xA-B7J)
80 MHz, 14 bit ADC (E444xA-122),
80 MHz, 14 bit ADC (E444xA-140)
321.4 MHz IF output (except E4447A)
–1 dB bandwidth 20 to 30 MHz nominal
–3 dB bandwidth 30 to 100 MHz nominal
70 MHz IF output
(Option E444xA-H70)
(except E4447A)
–1 dB bandwidth 20 to 30 MHz nominal
–3 dB bandwidth 30 to 100 MHz nominal
Video Bandwidth (VBW)
Range 1 Hz to 3 MHz (10 % steps),
4, 5, 6, 8 MHz and wide open
Accuracy ±6 % nominal
Stability
Noise sidebands (20°C to 30°C, CF = 1 GHz)
Offset Specification
Typical
100 Hz –91 dBc/Hz –96 dBc/Hz
1 kHz –103 dBc/Hz –108 dBc/Hz
10 kHz –116 dBc/Hz –118 dBc/Hz
30 kHz –116 dBc/Hz –118 dBc/Hz
100 kHz –122 dBc/Hz –124 dBc/Hz
1 MHz –145 dBc/Hz –147 dBc/Hz
6 MHz –154 dBc/Hz –156 dBc/Hz
10 MHz –156 dBc/Hz –157.5 dBc/Hz