manualshive.com logo in svg

Agilent Technologies All, Catalog

Share
Download
Agilent Technologies All Catalog Download Page 21

68

3

8000 Series

Infiniium 8000 Series Oscilloscopes (cont.)

Oscilloscopes

Accessories

Application Area

Application Name

Product Number/Option Number

Publication Number Description

Usability 

My Infiniium

E2699A

5988-9934EN

• Launch your application directly from

Enhancements

the oscilloscope front panel

Communication 

E2652A

5989-0372EN

• Ensure your design meets industry 

Mast Test Kit

communication standards. Comes with 
a set of electrical communication adapters 
to ensure convenient, reliable, and accurate 
connections to your device under test

VoiceControl 

E2682A

• Speak into the collar-mounted microphone 

software

to operate your Infiniium’s front-panel 
controls without using your hands

Logic Analyzer/

E5805A

• Easily make time correlated measurements 

Oscilloscope time 

between an Agilent 16900 Series logic 

correlation

analysis system or Agilent 1680/90 Series 
benchtop logic analyzer and an Infiniium 
oscilloscope without a correlation fixture

User Defined 

N5430A

5989-5632EN

• Develop your own custom math functions 

Function

or filters using MATLAB

®

and its Signal 

Processing Toolbox and display them on 
your oscilloscope along side the other 
standard functions*

Infiniiscan

N5415A 

5989-4605EN

• Quickly and easily identify signal integrity 

issues with InfiniiScan. Isolate anomalous 
signal behavior with application scans 
through thousand of acquired waveforms. 
Capture anomalies that hardware-based 
solutions can’t find

* User must purchase MATLAB

®

from The MathWorks separately.

Active Probes

Probing high-frequency signals becomes more challenging as the variety
of test points and the frequencies of the signals continue to grow. Probes
need to be lightweight, small, affordable, and offer the accessories and
probe tips you require to get your job done easily. For high-speed differen-
tial signal measurements, the 1130A InfiniiMax differential probe amp,
with its variety of probe heads, is a perfect compliment to the Infiniium
8000 Series oscilloscopes. Its 1.5 GHz bandwidth, extremely low input
capacitance, high common mode rejection and the patented resistor
probe tip technology provide ultra-low loading of the DUT and superior
signal fidelity. The 1156A active probe is a small, low-mass, active probe
also with 1.5 GHz bandwidth. The probe offers a flat frequency response
across the entire probe bandwidth, even with a variety of accessories
attached, giving you accurate insight into your high-speed measurement.
Agilent offers a variety of probe tips to help you probe any test point.

Model Probe System 

Single-ended/

Bandwidth Bandwidth

Differential

1156A

1.5 GHz

1 GHz with MSO8104A and DSO8104A

single-ended

600 MHz with MSO8064A and DSO8064A

1130A

1.5 GHz

1 GHz with MSO8104A and DSO8104A

both

1,2

1

Depending on probe head used.

2

For a complete probing solution, also order a connectivity kit or individual probe head(s).

Key Literature & Web Link

Infiniium 8000 Series Oscilloscopes Data Sheet, p/n 5989-4271EN
Infiniium Probes, Accessories and Options Data Sheet, p/n 5989-7141EN
Agilent Oscilloscope Probes and Accessories Selection Guide, 
p/n 5989-6162EN
Agilent 8000 Series Oscilloscopes Brochure, p/n 5989-5806EN

Ordering Information

Standard Probes Included
DSO8064A

10073C 10:1 Passive Probe (qty 4)

MSO8064A

10073C 10:1 Passive Probe (qty 4), 54826-68701 MSO Logic

Cable Kit (qty 1) 

DSO8104A

10073C 10:1 Passive Probe (qty 4)

MSO8104A

10073C 10:1 Passive Probe (qty 4), 54826-68701 MSO Logic

Cable Kit (qty 1)

Memory Options
N5407A-080

16 Mpts on 2 Channels, 8 Mpts on 4 Channels

N5407A-160

32 Mpts on 2 Channels, 16 Mpts on 4 Channels

N5407A-320

64 Mpts on 2 Channels, 32 Mpts on 4 Channels

N5407A-640

128 Mpts on 2 Channels, 64 Mpts on 4 Channels

Probe and Accessory Options
1146A

100 kHz/100 A Current Probe, AC/DC

N2772A

20 MHz Differential Probe (Requires N2773A power supply)

10070C

1:1 Passive Probe with ID

10076A

100:1, 4 kV, 250 MHz Probe with ID

N2771A

1000:1, 15 kV, 50 MHz High-voltage Probe

N2780A

2 MHz/500 A Current Probe, AC/DC (Requires N2779A Power Supply)

N2781A

10 MHz/150 A Current Probe, AC/DC (Requires N2779A 

Power Supply)

N2782A

50 MHz/30 A Current Probe, AC/DC (Requires N2779A 

Power Supply)

N2783A

100 MHz/30 A Current Probe, AC/DC (Requires N2779A 

Power Supply)

1147A

50 MHz Current Probe, AC/DC with AutoProbe Interface

1141A

200 MHz Differential Probe (Requires 1142A probe control and

power module)

1153A

200 MHz Differential Probe

1155A

750 MHz, 2-channel, Low-mass Active Probe

1156A

1.5 GHz Active Probe with AutoProbe Interface

1130A

1.5 GHz InfiniiMax Differential Probe Amplifier with AutoProbe

Interface (Requires one or more InfiniiMax probe head – E2675A, E2668A,
E2669A)

1144A

800 MHz Active Probe (Requires 1142A power supply)

N2916B

Rackmount Kit for 5000/6000 Series Scope

N2917B

Transit Case for 5000/6000 Series Scope

1180CZ

Testmobile Scope Cart

N2919A

Testmobile Bracket for 1180CZ and 6000 Series Scope

N2918A

Oscilloscope Evaluation Kit for 6000 Series Scope

E5396A

Half-size (17 channel) Soft Touch Connectorless Logic Probe for

MSO Models

Miscellaneous Options
017 (factory installed) 

≥

40 GB Removable Hard Disk Drive. 

Replaces 

≥

40 GB Internal Hard Disk with a 

≥

40 GB Removable Hard Disk.

Order the N5422A for Additional Hard Disk Drive Cartridges that contain
the Full Windows Operating System and Oscilloscope Application.

1181BZ

Testmobile System Cart

1184A

Testmobile with Keyboard/Mouse Tray and Drawer for Accessories

E2609B

Rackmount Kit

A6J

ANSI Z540-compliant Calibration

R-51B-001-3C

1 Year Return-to-Agilent warranty extended to 3 Years

Summary of Contents for All
































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands