manualshive.com logo in svg

Agilent Technologies All, Catalog

Share
Download
Agilent Technologies All Catalog Download Page 143

190

3

English URL 

www.agilent.com/find/products

B4601C
B4602A
B4606A
B4607A
B4608A
B4610A
B4630A
B4641A

Application Software for 16800, 16900, 1680 and 1690 Series Logic Analyzers

Logic Analyzers

Standard Displays Present Data in Familiar

Formats for Faster Debug and Analysis

Automate Measurement Setup and Validate Signal Integrity

As timing and voltage margins continue to shrink, confidence in 
signal integrity becomes an increasingly vital requirement of the
design verification process. With eye scan, you can have the same
eye-diagram capability in a logic analyzer that you have in your
scope, and it covers up to 510 channels at a time. Eye scan gives you
a rapid, comprehensive overview across hundreds of signals simul-
taneously.

Debug Real-time Code at the Source Level

• Correlate the logic analyzer trace with the high-level source code

that produced it

• Locate the cause of a problem by “stepping backward” from the

point where you see a problem to its root cause

• Set up your next logic analyzer acquisition by simply pointing

and clicking on a line of source code

• Determine the cause of data corruption by acquiring all activity

relative to a variable

Trigger, Search, View and Analyze at the Packet Level

More designs are incorporating serial buses. With Agilent’s packet
viewer you can trigger, search, view and analyze at the packet level.
The display is customized for the protocol family being decoded by
the packet decode tool. To optimize protocol viewing and analysis
you can simultaneously view summarized and detailed packet infor-
mation. Packet detail views include tabs for header, payload, and
lane information.

Get Additional Insights Into Your Design with

Multiple Views and Analysis Tools

As the complexity of digital systems increases, you need to analyze
and view data in ways that were previously unavailable in a logic
analyzer. The following analysis tools enable you to rapidly consoli-
date large amounts of data into displays that provide rapid insight
into your system’s behavior.
• The B4601C Serial-to-parallel analysis package converts a serial

data stream into parallel data words, performs clock recovery,
processes frame and data portions separately, and removes
stuffed bits from the data block

• Use the B4602A Signal Extractor Tool to extract I and Q data

from simple serial protocols or re-multiplex high-speed digital
data that has been de-multiplexed onto additional logic analyzer
channels

• B4606A (Development and Runtime) and B4607A (Runtime)

Advanced Customization Environment integrates Visual Basic
for Applications (VBA) into the logic analyzer application for 
creating custom data analysis, data visualization, instrument
control and measurement automation, and links to external PC
applications

• B4608A ASCII Remote Programming Interface (RPI) allows you

to remotely control the logic analyzer using ASCII commands

• B4610A Data Import Tool allows you to import external data into

the logic analysis system and analyze it just like data acquired by
the logic analyzer

• B4630A MATLAB Connectivity and Analysis package allows you

to easily use your custom MATLAB routines in conjunction with
data acquired from the logic analysis system

• B4641A Protocol Development Kit lets you create or modify

existing protocol description files in order to decode, 
display and trigger on packet data. Useful for proprietary 
protocols or modifying existing industry standard solutions

• 89601 VSA software provides vector signal analysis and 

modulation analysis for digital baseband, IF and RF

Key Literature & Web Link

Application Support for Agilent Logic Analyzers, p/n 5966-4365E

www.agilent.com/find/pnbs

Ordering Information

Serial-to-parallel Analysis Package

B4601C-010

Perpetual Node Locked License

B4601C-020

Perpetual Floating (server) License

Signal Extractor

B4602A-010

Perpetual Node Locked License

B4602A-020

Perpetual Floating (server) License

Advanced Customization Environment

B4606A-010

Development and Runtime Package, Perpetual Node 

Locked License

B4606A-020

Development and Runtime Package, Perpetual Floating 

(server) License

B4607A-010

Runtime Package, Perpetual Node Locked License

B4607A-020

Runtime Package, Perpetual Floating (server) License

Remote Programming Interface (RPI)

– Requires B4606A or B4607A 

B4608A-010

Perpetual Node Locked License

B4608A-020

Perpetual Floating (server) License

Data Import Tool

B4610A-010

Perpetual Node Locked License

B4610A-020

Perpetual Floating (server) License

MATLAB Connectivity and Analysis Tool

B4630A-010

Perpetual Node Locked License

B4630A-020

Perpetual Floating (server) License

Protocol Development Kit

B4641A-010

Perpetual Node Locked License

B4641A-020

Perpetual Floating (server) License

Digital Vector Signal Analysis (DVSA)

89601A-200

Basic Vector Signal Analysis Software

89601A-300

Hardware Connectivity (includes link to Logic Analyzers)

Identify problem signals quickly by viewing eye diagrams across all buses and 
signals simultaneously.

The split Source window displays the source code on top and the inverse-
assembled trace below. The two traces are time-correlated and track as you scroll.

Summary of Contents for All
































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands