Additional Information
Using the System Utilities
58
Agilent 8163A Lightwave Multimeter, Agilent 8164A Lightwave Measurement
System, & Agilent 8166A Lightwave Multichannel System, Fourth Edition
2
Move to the <
Date & Time
> menu option and press
Enter
. You see a box,
similar to Figure 32, displaying the current date and time settings.
3
Use the cursor key to move to the Date field. Press the [Edit] softkey. The day
of the month is highlighted.
4
Use the left and right cursor keys to move to the day, month or year. Edit the
day, month or year using the cursor key. Press
Enter
.
5
Perform steps 3 to 4 again if the date is not fully correct.
6
Use the cursor key to move to the Time field. Press the [Edit] softkey. The
hour of the day is highlighted. The 24-hour clock is used.
7
Use the left and right cursor keys to move to the hour, minute, or second. Edit
the hour, minute, or second using the cursor key. Press [OK].
8
Perform steps 6 to 7 again if the date is not fully correct.
9
When the time and date are both correct, press [Close] to return to the
configuration menu.
How to Set the GPIB Address
N O T E
The default GPIB address is
20
.
To set the GPIB address:
1
Press the
Config
hardkey.
Figure 32
Editing the Date and the Time
