Agilent Technologies 87075C Option H08, User'S And Service Manual

Page: 65 / 66

Chapter 5 63
Safety and Regulatory Information
Instrument Markings
Instrument Markings
When you see this symbol on your instrument, you should refer to
the instrument’s instruction manual for important information.
This symbol indicates hazardous voltages.
The laser radiation symbol is marked on products that have a
laser output.
This symbol indicates that the instrument requires alternating
current (ac) input.
The CE mark is a registered trademark of the European
Community. If it is accompanied by a year, it indicates the year the
design was proven.
The CSA mark is a registered trademark of the Canadian
Standards Association.
This symbol indicates the product meets the Australian
Standards.
This symbol indicates separate collection for electrical and
electronic equipment, mandated under EU law as of August 13,
2005. All electric and electronic equipment are required to be
separated from normal waste for disposal (Reference WEEE
Directive, 2002/96/EC).
This text indicates that the instrument is an Industrial Scientific
and Medical Group 1 Class A product (CISPR 11, Clause 4).
This symbol indicates that the power line switch is ON.
This symbol indicates that the power line switch is OFF or in
STANDBY position.
Safety Earth Ground. This is a Safety Class I
product (provided
with a protective earthing terminal). An uninterruptible
safety earth ground must be provided from the main power
source to the product input wiring terminals, power cord, or
supplied power cord set. Whenever it is likely that the
protection has been impaired, the product must be made
inoperative and secured against any unintended operation.
!