Agilent Technologies 81250, Installation Manual

Page: 85 / 146

Installing a Module 6 Changing the ParBERT Hardware
Agilent 81250 ParBERT Installation Guide, May 2004 6-7
The supported address ranges are:
Table 4 Logical Address Ranges
Master Expander 1 Expander 2
0 – 127 128 – 191 192 – 254
Only if you are using the IEEE 1394 PC link to VXI and are setting up
independent systems in the master and the expander frames (no master-
slave configurations), you may use the master’s address range also for the
expander frames.
After you have set the logical address, record it in your mainframe
configuration table.
How to Plug In the Module
To install the module:
1 Insert the module into the mainframe.
Make sure that the clock module is at the leftmost position and that all
data modules are installed next to each other.
2 Using a 2-mm pozidrive or flathead screwdriver, secure the module to
the mainframe with the two retaining screws on the top and bottom of
the module front panel.
NOTE