Agilent Technologies 41501A, User Manual

Page: 47 / 246

Agilent 4155C/4156C User’s Guide Vol.1, Edition 11 2-7
Installation
Inspection
Inspection
This section describes what to do when you receive the 4155C/4156C and
accessories.
1. Inspect the shipment.
2. Verify the 4155C/4156C operation.
To maintain the 4155C/4156C and 41501A/B measurement accuracy specifications,
perform calibration and adjustments once a year.
To Inspect the 4155C/4156C and Accessories
Perform the following inspections when the 4155C/4156C and accessories arrive at
your site.
• Before unpacking any components, inspect all boxes for any signs of damage
that might have occurred during shipment, such as:
• dents
• scratches
• cuts
• water marks
If you suspect any damage, notify your local Agilent Technologies sales or
service office.
• When you open the boxes that contain the 4155C/4156C and accessories, check
the components against the contents lists attached to the boxes.
If anything is missing, notify your local Agilent Technologies sales or service
office.