Agilent Technologies 41501A, User Manual

Page: 104 / 246

3-20 Agilent 4155C/4156C User’s Guide Vol.1, Edition 11
Connecting to Network
If You Use a Windows PC
Network Parameters Required
To set up a server, the following network parameters are required. These parameters
are usually assigned and managed by the network administrator. Contact the
network administrator of your site to acquire the parameter values.
Table 3-2 Network Parameters
NOTE If you are going to use the DHCP server, you need only the computer name and the
domain name. The DHCP server assigns the IP address automatically, and changes
it dynamically.
NOTE If you connect the computer to the 4155C/4156C directly and
never
connect to a
local area network, assign the computer name and IP address by yourself.
For the workgroup name, set WORKGROUP.
Do not set the subnet mask and the IP address of gateway.
Parameter Example value used in this section
Computer name
a
a. A maximum 15 alphanumeric characters is available for the
4155C/4156C.
PC001
Workgroup or Domain DOMAIN1
IP address of computer 192.168.1.1
Subnet mask 255.255.255.0
IP address of Gateway 192.168.1.3