Agilent Technologies 3070 Series, Site Preparation

Page: 2 / 410

© Agilent Technologies 1989–2002 Agilent 3070 / 79000 Site Preparation 1
Site Preparation – Legal Notices
03066-90114 Rev. Z 06/2002
In this Chapter
■ Notice , 1
■
U.S. Government Restricted Rights , 1
■
Radiated Immunity , 2
■ Overvoltage Category , 2
■
Pollution Degree for Agilent 3070 / 79000 Systems , 2
■
Insulation Rating for Wires Connected to Agilent 3070
/ 79000 Systems , 2
■
Acoustic Level for Agilent 3070 / 79000 Systems , 2
■
Acknowledgements , 2
■ 3070 Series I DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014 , 3
■
3070 Series II DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014 , 4
■
3070 Series 3 DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014 , 5
■ 79000 / xDSL DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014 , 6
■
Emergency Shutdown , 7
■ Warranty , 8
■
User Safety Symbols , 9
■
Safety Symbols , 10
■ Warnings , 11
Notice
This manual is provided “as is” and is subject to change
without notice.
AGILENT TECHNOLOGIES, INC. MAKES NO
WARRANTY OF ANY KIND WITH REGARD TO
THIS MATERIAL, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF
NONINFRINGEMENT, MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. Agilent
shall not be liable for errors contained herein, nor for
direct, indirect, general, special, incidental or
consequential damages in connection with the
furnishing, performance, or use of this material.
U.S. Government Restricted Rights
The Software and Documentation have been developed
entirely at private expense. They are delivered and
licensed as “commercial computer software” as defined
in DFARS 252.227-7013 (Oct 1988), DFARS
252.211-7015 (May 1991) or DFARS 252.227-7014
(Jun 1995), as a “commercial item” as defined in FAR
2.101(a), or as “Restricted computer software” as
defined in FAR 52.227-19 (Jun 1987) (or any equivalent
agency regulation or contract clause), whichever is
applicable. You have only those rights provided for such
Software and Documentation by the applicable FAR or
DFARS clause or the Agilent standard software
agreement for the product involved.