RTK Network
(1)
Correction signal
(2)
Modem type
(3)
Signal format
(4)
Connection type
(5)
Distance to base
(6)
Signal lag
(7)
Connection status
(8)
Fallback ON/OFF
RTK Network is a correction signal, which provides
centimetre level accuracy. Signal is only available,
if Valtra Guide has centimetre authorization level.
RTK modem receives the correction signal via
mobile network and therefore requires a SIM card.
Refer to the service provider for the data settings.
CORRECTION
SIGNAL
CONNECTION
STATUS
RTK Network
MODEM TYPE
VALTRA MODEM
Connected
NMEA
SIGNAL FORMAT
CONNECTION
TYPE
Data connection
RTCM 3.1
SIGNAL LAG
4,00s
DISTANCE TO
BASE
50.00m
GPRS
NTRIP
1 2 3 4
5
6
7
8
GUID-1C282D82-B38E-49A1-8C60-26ECC254AB59-low.svg [Low]
Fig. 27
GPRS
(1)
Pin
(2)
APN (access point name)
(3)
User name (optional)
(4)
Password (optional)
(5)
Service provider
(6)
Signal strenght
(7)
Internet connection ON/OFF
(8)
Roaming enabled/disabled
(9)
Roaming active/not active
GPRS tab has settings for the GPRS modem. The
modem calls to the server, which provides RTK
correction signal and therefore a SIM card is
required for the connection.
Refer to the service provider for the data settings.
NOTE:
Roaming function can cause additional
costs if it is enabled.
PIN
CURRENT NETWORK
0000
APN
internet
ROAMING ACTIVE
NMEA
USER
PASSWORD
INTERNET
CONNECTION
GPRS
NTRIP
TELIA
4
3
1 2
8
9
5
6
7
GUID-9A10DA35-5F9E-4845-9278-03CF96BD9302-low.svg [Low]
Fig. 28
xFill
(1)
Satellite receiver
(2)
Base datum
(3)
Baud rate
(4)
Frequency
(5)
xFill status
(6)
Signal lag
(7)
Remaining time
xFill is a feature, which can maintain the
centimetre level accuracy for a maximum of 20
minutes when the Base Station or RTK Network
correction signal is lost. xFill is always on when the
correction source is Base Station or RTK Network
correction signal. The frequency and baud rate are
the same which are used for CenterPoint RTX
correction source. Refer to the service provider for
the data settings.
SATELLITE
RECEIVER
xFill STATUS
Trimble AG-382
BASE DATUM
WGS84/ITRF2008
Ready
NMEA
BAUD RATE
2400
SIGNAL LAG
4,00s
REMAINING
TIME
1200s
GPRS
NTRIP
FREQUENCY
1 539,8152 MHz
1 2 3
4
7
5 6
GUID-C60EEC13-E1E0-4589-9910-4BB55E8F3D49-low.svg [Low]
Fig. 29
3. Signal definition and characteristics
Smart farming
39
39 924 21 5
Summary of Contents for Valtra Smart farming
