manualshive.com logo in svg

AGCO Valtra Smart farming, Operator'S Manual

Share
Download
AGCO Valtra Smart farming Operator'S Manual Download Page 13

Always make sure that the safety signs are in the correct locations and that you can read the safety signs.

The illustrations of safety sign locations are in this section.
Keep the safety signs clean. If necessary, use a weak soap and water solution.

2.1.5  A word to the operator

It is your responsibility to read and understand the

safety section in this manual and the manual for all

implements before you operate this machine. You

are responsible for your safety. Good safety

procedures prevent injury to you and the persons

around you.
Make the information in the safety section of this

manual a part of your safety procedure. This safety

section is written only for this type of machine.

Safety is your responsibility. You can prevent injury

and death.
This safety section gives basic safety examples

that can occur during the operation and

maintenance of your machine. This safety section

is not a replacement for safety instruction in other

sections of this manual.
Injury or death can occur if the safety instruction is

not obeyed.
Learn how to operate the machine and how to use

the controls correctly.
Do not operate the machine if you do not know

how to operate the machine. Do not let persons

operate the machine that do not know how to

operate the machine.
Follow all safety instructions in the manuals and on

the safety signs on the machine, the implements,

and the attachments.
Use only approved attachments and implements.
Make sure that your machine has the correct

equipment that is necessary by the local

regulations.

WARNING:
Do not use alcohol or drugs that can
have an effect on alertness or
coordination. If you use prescription
or 'over the counter' drugs, get
medical advice about the safe
operation of machines.

CAUTION:
If attachments or implements used
with this machine have a different
operator manual, see that operator
manual for other important safety
instructions.

GUID-AC91CCF6-1FF8-4A85-97A1-2D1562806825-high.jpg [High]

Fig. 3  

GUID-F38BCC9A-5A98-41F3-BA3C-2C5AB224EDFB [V7]

2. Safety

18

Smart farming

39 924 21 5

Summary of Contents for Valtra Smart farming











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands