AGCO Valtra Smart farming, Operator'S Manual

Page: 108 / 170

4.
Measure the length of the gap on the field
from the starting point of the drill to the
desired stopping position
5.
Set the slider as necessary if the planter/
seeder switch-off occurs after too short or
long time.
6.
Enter the length of the measured gap.
7.
Enter your working speed.
8.
Tap to accept.
ADJUST SWITCH-OFF TIME
Planter/Seeder
switches off too
EARLY
Please measure the
lenght of the current GAP
Please enter the working
speed
Planter/Seeder
switches off too
LATE
0
cm
13,00
km/h
1
2
3
4
GUID-906211D3-A5FB-4DFF-8A3E-3C5F29B5E10D-low.svg [Low]
Fig. 14
1 Planter/seeder switches off too early
2 Planter/seeder switches off too late
3 Length of the current gap
4 Working speed
5.1.6.3 Reset the adjusted delay times
Procedure
1.
Go to the Section Control screen.
2.
Tap the Delay settings tab.
3.
Tap the Reset adjusted delay.
The Adjusted switch-on and switch-off
settings reset to the same values as the
default settings of the implement.
DELAY SWITCH-ON TIME
DEFAULT:
0,00
ADJUSTED:
DELAY SWITCH-OFF TIME
0,00 s
0,0
DEFAULT:
0,00
ADJUSTED:
0,00 s
2
1
GUID-7A51DD90-A9EF-4F3F-A060-220506681D37-low.svg [Low]
Fig. 15
1 Delay settings tab
2 Reset adjusted delay
GUID-5566DACA-076C-4357-9E47-E3D0D5F3CC20 [V1]
5. Section Control operation
Smart farming 113
39 924 21 5