AGCO Valtra Smart farming, Operator'S Manual

Page: 31 / 170

GPRS
(1) Pin
(2) APN (access point name)
(3) User name (optional)
(4) Password (optional)
(5) Service provider
(6) Signal strenghth
(7) Internet connection ON/OFF
(8) Roaming enabled/disabled
(9) Roaming active/not active
GPRS tab has settings for the GPRS modem. The
modem calls to the server, which provides RTK
correction signal and therefore a SIM card is
required for the connection.
Refer to the service provider for the data settings.
NOTE:
Roaming function can cause additional
costs if it is enabled.
PIN
CURRENT NETWORK
0000
APN internet
ROAMING ACTIVE
NMEA
USER
PASSWORD
INTERNET
CONNECTION
GPRS
NTRIP
TELIA
1 2 4 8 9
5 6 7
3
GUID-926F21BD-054F-4F8E-A2C9-BF7D6A0B66D2-low.svg [Low]
Fig. 19
NTRIP
(1) NTRIP address
(2) NTRIP port
(3) Mount point
(4) User name
(5) Password
(6) Connect/Disconnect to server
(7) NTRIP active/not active
The NTRIP address must be in numeric IP format.
When you turn the tractor main power off and
again on, connection to the NTRIP server connects
automatically. If the Valtra Guide receiver does not
receive the NTRIP correction signal, disconnect
and connect it again. Refer to the service provider
for the data settings.
NTRIP ADDRESS
NTRIP DATA
192.168.0.1
NTRIP PORT
80
NMEA
MOUNT POINT
USERNAME
Valtra01
PASSWORD
*********
VRTstm
GPRS
NTRIP
1 2 3 4 5
6 7
GUID-7EC1CB1C-7949-4CC0-A846-25F3940E6AA5-low.svg [Low]
Fig. 20
3.3.4 Trimble receiver
You can open the correction source settings from
the Correction signal icon on the Map screen.
(1) Correction signal icon
The pop-up screen of the correction source
settings consists of 5 settings tabs at maximum.
Only tabs relevant for selected correction signal
show.
SBAS and the Base station are free, but for all the
other correction source signals you need to
purchase the license.
GUID-478DB498-DAF4-47C2-8607-E14FCDEE6651-high.jpg [High]
Fig. 21
GUID-CE39DAB9-7369-40C2-9379-47634CB8FC72 [V4]
3. Signal definition and characteristics
36 Smart farming
39 924 21 5