AGCO Valtra Smart farming, Operator'S Manual

Page: 104 / 170

3.
Adjust the In-field overlap setting.
5.1.5.2 Adjust the boundary overlap
You can adjust the overlap applicable to your current work. With 0% overlap, section deactivates
immediately when it touches field boundary or headland (possible gaps). With 100% overlap, section does
not deactivate until it fully completes the work in its area (possible overlap).
You can use, for example, following settings as a guide line for overlap:
• 100 % for fertilizers to avoid gaps.
• 50 % for precision drills as the seed falls in the middle of the section.
• 0 % for chemicals because to spray 2 times can cause damage to the crop.
OVERLAP SETTINGS
IN-FIELD BOUNDARY
DRIVING
DIRECTION
TOLERANCE OUTER
SECTION
0
%
100
%
0
cm
0
cm
0 % 50 % 100 %
1 2
GUID-11870643-1B60-498A-A8BD-E60CF0119106-low.svg [Low]
Fig. 7
1 Overlap settings tab 2 Boundary setting
Procedure
1.
Go to the Section Control screen.
2.
Tap the Overlap settings tab.
3.
Adjust the Boundary overlap setting.
5.1.5.3 Adjust overlap for driving direction
You can adapt the switch-on and switch-off times of the implement when you go near or go out of the
headland. For example with precision drills, you can adjust if the last seed falls directly on the first headland
row or if there is some space between. With applicable adjustment you can make the cultivation or harvest
easier.
OVERLAP SETTINGS
IN-FIELD BOUNDARY
DRIVING
DIRECTION
TOLERANCE OUTER
SECTION
0
%
100
%
0
cm
0
cm
1
2
0 cm 5 cm
GUID-0A91B5EA-401B-48D8-9592-97F1C7E5987F-low.svg [Low]
Fig. 8
1 Overlap setting tab 2 Driving direction setting
GUID-BB277498-E9CE-46AA-8046-62F5C8576F80 [V1]
GUID-56C88CAD-D49A-4BCB-BB6D-FCBC6F6B04AB [V1]
5. Section Control operation
Smart farming 109
39 924 21 5