AGCO Valtra Smart farming, Operator'S Manual

Page: 152 / 170

Problem Cause Indication Action
When ground conditions
are bad and implements
are installed, the tractor
pulls away from the
wayline
Wayline guidance is
better to use on different
ground conditions or
with the implement
raised
• Decrease the speed
and the working
depth.
• Make sure that the
implement settings
are correct; if needed,
raise the implement.
Implement settings are
not optimal
Wayline guidance is
better to use on different
ground conditions or
with the implement
raised
Make sure that the
implement settings are
correct
Overlaps or errors occur
during automatic track
guidance
Wayline distance is set
incorrectly
- Adjust the path-to-path
distance
Implement offset is set
incorrectly
- Adjust the implement
offset
Not a valid GNSS
position, automatic track
guidance is not possible
Correction signal is not
available
See the Correction
source screen
• Make sure that there
is a valid correction
signal license
available.
• Make sure that the
correction signal is
not blocked (for
example forests,
buildings, high-voltage
power lines)
Expired correction signal
license
See the Correction
source screen
Order a new correction
signal license. Contact
your dealer.
The GNSS position signal
is blocked
- Drive away from trees or
building that cause the
blockage
Receiver failure See the Correction
source menu
Speak to an approved
Valtra dealer
Correction signal is not
available in the area
See the Correction
source menu
-
Bad reception of the
correction signal
Correction signal is set
incorrectly through the
terminal
See the Correction
source menu
Speak to an approved
Valtra dealer
Correction signal satellite
is not in the view
See the Correction
source menu
-
Correction signal data or
license data are not
correct
See the Correction
source menu
-
Incorrect serial number
when the correction
signal is ordered
- -
10. Troubleshooting
Smart farming 157
39 924 21 5