AGCO Valtra Smart farming, Operator'S Manual

Page: 158 / 170

11.2 Base station
You can use the Valtra Guide system with a reference station for centimeter precision. The operation of the
system is the same if you receive the correction signal from a reference station or from a satellite. This
section gives an overview of the additional steps required for reference station management. The
reference station is an integrated unit that has a radio module, a GNSS receiver, a GNSS aerial and a radio
aerial. The reference station is installed on a tripod. The reference station uses an internal radio aerial to
supply the correction signal to the mobile units in a radius of 3 km to 5 km.
• GNSS satellites transmit position signals.
• The base station compares this data with its accurate position.
• Correction signals are transmitted from the base station (transmitter) to the vehicle (receiver) with a
modem.
• The Valtra Guide receiver calculates a very accurate location data from the position signal and correction
signal.
11.2.1 Scope of delivery and accessories
HiPer AG base station
GUID-66C44C35-0A64-4A74-8A85-63297CA204D3-high.eps [High]
Fig. 3
UHF aerial
GUID-700AC22D-2BA5-41A8-9D9E-225B86AB46A8-high.eps [High]
Fig. 4
Mains cable
GUID-BD69D918-E2F0-4793-BAD8-AA1770995A31-high.eps [High]
Fig. 5
GUID-45F2AE53-A1E8-4E8E-8889-44BFA6DE19C0 [V2]
GUID-12033DDC-061D-4E5D-BD13-A356B88EC7D3 [V2]
11. Accessories
Smart farming 163
39 924 21 5