AFX FX-120, International Owner’S Manual

Page: 11 / 104

11
TO CORRECTLY DETERMINE YOUR CUSTOM FIT, FIRST TRY THE
HELMET SIZE YOU NORMALLY WEAR WITH NO AIR IN THE SYSTEM.
NOTE: TO RELEASE THE AIR, PUSH THE RELEASE VALVE LOCATED ON
THE RIGHT SIDE INNER CHIN BAR.
THEN GRADUALLY INCREASE THE PRESSURE BY PUMPING THE AIR
BLADDER PUMP LOCATED ON THE LOWER BACK OF THE HELMET SHELL
UNTIL THE FIT BECOMES SNUG BUT NOT PAINFULLY TIGHT. DO NOT
OVER PUMP THE SYSTEM THIS IS NOT A TOY.
REMEMBER TO RELEASE THE AIR PRESSURE BEFORE REMOVING THE
HELMET.
*SAFETY WARNING*
NOTE: AIR PUMP SYSTEM IS FOR A CUSTOM
FIT ADJUSTMENT AND NOT TO BE USED AS A
SUBSTITUTE FOR CORRECTLY DETERMINING
YOUR HELMETS WEARABLE SIZE