Operation 43
4510012 - REV F – 220621
Adjust the height of the Upper and/or Lower Manifolds as desired. The Manifolds do not
need to remain parallel to one another. Maximum height variation for a single Manifold is
7.5” (19.1 cm).
When satisfied with the vertical positions of the Manifolds, use the 13mm Wrench to
retighten the Cap Screws to lock the Manifold Height Adjusts in place.
Repeat this procedure to adjust the height of the Manifolds at the other end of the
Steam Tunnel and on the opposite side of it.
NOTE:
The example above is one of many possible Manifold height configurations
and is not necessarily the ideal one for all situations.
Adjusting Steam Manifold Height
(Front View)
Upper Steam
Manifold
Lower Steam
Manifold
Inside Manifold
Access Door
Upper Manifold
Height Adjust
(Up/Down)
Lower Manifold
Height Adjust
(Up/Down)
Upper and Lower Manifolds are positioned
down near Conveyor at Tunnel Entrance to
focus steam heat on lower portion of label first
Upper and Lower Manifolds are
positioned higher at Tunnel Exit to focus
steam heat on upper portion of label
Example of Steam Manifold Height Adjustment
(Front View)
Entrance
Exit
Summary of Contents for STC-WSN300-2M
