Afinia Label
28
| Using the Printer
Wrong Media
If the media loaded in the printer does not match the Media Type selected in the
Preferences, the printer may not print.
Media mismatches that will result in an error state are:
Continuous
loaded,
Die Cut
or
Black Mark
selected
Die Cut
loaded,
Black Mark
selected
Black Mark
loaded,
Die Cut
selected
Media may feed through the printer past the cutter before the error state occurs.
1.
Media will unload after cutting
2.
Display will show Out of Paper message
a.
Use Out of Paper recovery steps from page 27
End of Roll
If the media runs out during printing, print will stop and the printer will enter an error
state.
1.
Media will unload after cutting
2.
Display will show Out of Paper message
a.
Use Out of Paper recovery steps from page 27
Shutting Down the Printer
To avoid damaging the printer or cartridges, always use the Control Panel
power button to shut the printer down.