Afinia Label
20
| Using the Printer
Cartridge Low Alert
Use the
Up
and
Down
buttons to set
Alert
levels to either
Automatic
or
Custom
; press
OK
when the correct option is selected. Alert levels can be set for each cartridge.
If set to
Custom
, use the
Up
and
Down
buttons to set the percentage remaining and
click
OK
when each percentage is set.
Cartridge Details
Select
Cartridge Details
and press
OK
.
Use the
Up
and
Down
buttons to select the correct cartridge and press
OK
. Information
on the cartridge will be displayed.
Network
Select
Network
on the Home Screen and press
OK
. These settings are only used if the
502 Label Printer is connected to your network using an Ethernet cable.
Ethernet Settings
Select
View Ethernet Details
to review or print the Ethernet settings.
Press the
button to print the information. Printing requires minimum 4” wide
continuous stock.
Ethernet Settings : Advanced Settings
IP Settings
By default, the 502 Label Printer Advanced Ethernet Settings are
Automatic
. If your
network uses DHCP through a Domain Name Server, you do not need to change the
IP Settings.
After the printer has been connected to the network and is assigned an IP address,
the IP address can be displayed using the
View Ethernet Details
menu option above.
To assign a Static IP address to the printer, change the
IP Settings
to
Manual
. Enter
in the
IP Address
,
Subnet Mask
,
Default Gateway
,
Preferred DNS Address
, and
optionally enter an
Alternate DNS Address
.
If a Domain Name Server has assigned the printer an IP address, the IP address,
Subnet Mask, Default Gateway, and DNS Server addresses will already be entered.
To add or change an address, use
the Up and Down buttons to
select each digit of the address,
moving from left to right.
Press the
button when the
current digit is correct to move
to the next digit.
Press the
OK
button when each
address is complete.