502 Label Printer
Using the Printer |
17
Bypassing the Unwinder
(L502 Printer model only)
The integrated Unwinder can be bypassed if an external unwinder is used. Reasons for
using an external unwinder would include:
Using rolls with a diameter greater than 8”
Using highly reflective label stock, such as gold or silver
Using stock not on a 3” core
To bypass the integrated
unwinder:
1.
Loosen Unwinder
knob and remove end
plate
2.
Turn mandrel so one
flat surface faces
straight up
3.
Load media from the
external unwinder
If the integrated unwinder turns or you get an unexpected
Out of Paper
message when
printing, reposition the mandrel.
To use the integrated unwinder again, unload the media on the external unwinder from
the printer and load a roll of media onto the mandrel.