38
For Technicians | AfiPass II Installation Guide
8.5
Testing ID Range and Troubleshooting
Test Mode
also allow a dedicated continuous transmission mode, similar to the transmission power
setting mode, for testing and troubleshooting. The test is done using the Passive Identification tag.
The RX LED and buzzer (if enabled) will indicate proper reception at the distance of the tag from the
antenna.
To check the reception range:
1.
Set the technician's tool to
ANT Mode
: Turn ON
TS1
and
TS2
.
Indication: the displays shows '
ANT T
'.
2.
Set the antenna number:
Press PB1 to increase in increment by 1.
Press PB2 to decrease in increments of 1.
Indication: The display shows the selected antenna number '
ANT XX
' and the antenna starts
transmitting immediately.
3.
Check the ID range using a passive ID tag.
Indication: The RX LED turns on and a sound is emitted (if the buzzer is enabled) while the tag
is within the ID range of the antenna.
