28
For Technicians | AfiPass II Installation Guide
Caution: When connecting the wires of the antenna signal cable to the plug, make sure the
screws are fastened tightly and no wires from the shield are loose. Loose connections can
result in a shortage and Controller malfunction.
4.
Connect antenna cable connectors to the PCB.
5.
Repeat steps 1 to 4 for the number of antennas used (see Figure
).
Figure
10
– AfiPass II Controller with 5 Antennas Connected
6.
Connect the communication cables: Connect a standard RS-485 communication cable (input
from PC or previous device) to the
PC COMM In
connector (J1) on the left edge of the
AfiPass II PCB.
7.
Connect a standard RS-485 communication cable (output to next device) to the
PC COMM
Out
connector (J2) on the left edge of the AfiPass II PCB.
Figure 11 – Communication Cables
