Afag SREH-50-IOL Assembly And Operating Instructions Manual Download Page 6

Page: 6 / 52

General

6 – 52

Assembly instructions EN



SREH-50-IOL



Date 17.06.2022



Version 1.0

This note contains important additional information as well as useful tips for

safe, efficient and trouble-free operation of the smart rotary module.

Further warning signs:

Where applicable, the following standardised symbols are used in this manual

to point out the various potential health risks.

Warning - Dangerous electrical voltage.

Warning - Risk of injury from contact with hot surfaces.

Warning - Risk of hand and finger injury due to uncontrolled

movements of components.

Warning - Magnetic field

Warning - Risk of injury as a result of parts being flung out!

1.3 Additional symbols

In these assembly instructions the following symbols are used to highlight

instructions, results, references, etc.

Symbol

Description

Instructions (steps ...)



Results of actions



References to sections



Enumerations not ordered

Summary of Contents for SREH-50-IOL





















































Search results

Summary of Contents for SREH-50-IOL

Reviews:

Related manuals for SREH-50-IOL

Brands by name

Popular brands

Afag SREH-50-IOL, Assembly And Operating Instructions Manual

Search results

Summary of Contents for SREH-50-IOL

Reviews:

Related manuals for SREH-50-IOL

Brands by name

Popular brands