Afag SREH-50-IOL, Assembly And Operating Instructions Manual

Page: 23 / 52

Installation, assembly and setting
Assembly instructions EN

SREH-50-IOL

Date 17.06.2022

Version 1.0 23–52
No warranty will be granted for damage caused by improper installation on the
part of the operating company.
Also observe the safety instructions in

Chapter 2 “Safety instructions” in this
manual.
6.2 Assembly and attachment
The SREH-50-IOL can be installed vertically or horizontally. The module can be
screwed through or screwed onto the side or the lower surface of the motor
housing.
Fig. 4 Rubber covers on the SREH-50
NOTICE
Risk of material damage due to manipulation of the modules!
Unauthorised manipulation of the smart rotary module can cause damage to
property. In such cases, any warranty will be voided!

Basically, no manipulations may be made to the module or to the screws
and nuts.

The rubber covers (Fig. 4) must not be removed!

The only exception: the two integrated module fastening screws, which
are screwed back from below for mounting the module (

Chapter 6.2).
Do not remove