Afag SREH-50-IOL Assembly And Operating Instructions Manual Download Page 2

Page: 2 / 52

2 – 52

Assembly instructions EN



SREH-50-IOL



Date 17.06.2022



Version 1.0

Dear Customer

Thank you for choosing our products and placing your trust and confidence in

our company!
These assembly and operating instructions contain all essential information you

need about your product. Our aim is to provide the required information as

concisely and clearly as possible. If, however, you still have any questions on

the contents or suggestions, please do not hesitate to contact us. We are always

grateful for any feedback.

Our team will also be glad to answer any further question you may have

regarding the smart rotary module or other options.

We wish you every success with our products!

With kind regards

Your Afag team

© Subject to modifications

The modules have been designed by Afag Automation AG according to the state

of the art. Due to the constant technical development and improvement of our

products, we reserve the right to make technical changes at any time.

Updates of our documentations

Unlike the printed documents, our digital instructions manuals, product data

sheets and catalogues are being continuously updated on our website.
Please keep in mind that the digital documents on our website are always the

latest versions.

All contents of the present assembly and operating instructions, in particular the

No part of these assembly and operating instructions may be reproduced,

distributed (made available to third parties), or transmitted in any form or by any

means, including photocopying, recording, or other electronic or mechanical

methods, without the prior written permission of Afag Automation AG.

Afag Automation AG

Luzernstrasse 32

CH-6144 Zell (Switzerland)

Tel.:

+41 62 959 86 86

e-mail: [email protected]

Internet: www.afag.com

Summary of Contents for SREH-50-IOL





















































Search results

Summary of Contents for SREH-50-IOL

Reviews:

Related manuals for SREH-50-IOL

Brands by name

Popular brands

Afag SREH-50-IOL, Assembly And Operating Instructions Manual

Search results

Summary of Contents for SREH-50-IOL

Reviews:

Related manuals for SREH-50-IOL

Brands by name

Popular brands