Afag SREH-50-IOL, Assembly And Operating Instructions Manual

Page: 46 / 52

Declaration of incorporation
46 – 52 Assembly instructions EN

SREH-50-IOL

Date 17.06.2022

Version 1.0
11 Declaration of incorporation
Declaration of incorporation
for partly completed machinery according to the Machinery Directive 2006/42/EC, Annex II, 1.B
The manufacturer hereby declares:
Afag Automation AG, Luzernstrasse 32, CH-6144 Zell
that the partly completed machine:
Product description Smart rotary module SREH-50
Type: SREH-50-IOL
complies with the following essential health and safety requirements of the Machinery Directive 2006/42/EC
at the time of declaration: 1.1; 1.1.1; 1.1.2; 1.2; 1.2.1; 1.2.3; 1.2.4.4; 1.2.5; 1.3; 1.3.3; 1.3.5; 1.3.6; 1.3.7;
1.3.8.1; 1.3.8.2; 1.3.9; 1.4; 1.4.1; 1.5; 1.5.1; 1.6; 1.6.1; 1.6.3; 1.6.4; 1.7; 1.7.1; 1.7.4.; 1.7.4.1; 1.7.4.2; 1.7.4.3;
3.3.5; 3.4.1
Harmonised standards applied, in particular:
2014/30/EU Electromagnetic Compatibility Directive (EMC)
2014/35/EU Low Voltage Directive (LVD)
EN ISO 12100:2010 Safety of machinery - General design principles - Risk assessment and risk
reduction.
DIN EN 60204-1:2018 Safety of machinery - Electrical equipment of machines - Part 1: General
requirements
Note:
The partly completed machinery must not be put into service until the machinery into which it is to
be incorporated has been declared in conformity with the provisions of Machinery Directive
2006/42/EC.
The manufacturer undertakes to transmit, in response to a reasoned request by the national authorities,
relevant technical documentation for the partly completed machinery. The relevant technical documentation
was created according to Annex VII, Part B of the above-mentioned Directive.
Authorised representative for compiling the technical documentation:
Niklaus Röthlisberger, Product Manager, Afag Automation AG, CH-Zell
Place/Date: Zell, 15.06.2022
Siegfried Egli
Managing Director
Afag Automation AG
Niklaus Röthlisberger
Product Manager