Afag SREH-50-IOL, Assembly And Operating Instructions Manual

Page: 44 / 52

Maintenance and repair
44 – 52 Assembly instructions EN

SREH-50-IOL

Date 17.06.2022

Version 1.0
9.2.1 Overview of maintenance points
Fig. 20 Maintenance smart rotary module SREH-50-IOL
No. Maintenance point Maintenance work
Interval
System
[On/Off] Remarks
1
Smart rotary module
Cleaning and
checking
As required [Off]
-

Clean the servo gripper with a dry, lint-free cloth.
- Do not spray the module with water, do not use
aggressive cleaning agents.
- Perform a visual inspection of the smart rotary module.
9.2.2 Further maintenance
Further maintenance is not required, if the ambient conditions listed below are
complied with:

Clean working area

No use of splash water

No abrasion or process dusts

Environmental conditions as specified in the technical data (

Chapter 3).
9.3 Spare parts and repair work
Afag Automation AG offers a reliable repair service. Defective modules can be
sent to Afag for warranty repair within the warranty period.
Damaged modules may only be replaced or repaired by Afag Automation
Afag! Spare parts are not available.