Afag DG 16 Assembly & Operating Instructions Download Page 44

Page: 44 / 50

Maintenance and Repair

44 – 50

Assembly instructions EN



DG 16



Edition 07/2020



Rev. 3.0

9.4 Spare parts and repair work

Afag Automation AG offers a reliable repair service. Defective rotary grippers

can be sent to Afag for warranty repair within the warranty period.

Damaged rotary grippers may only be replaced or repaired by Afag

Automation AG!
Afag Automation AG does not supply spare parts for the rotary grippers.
Please note that Afag does not assume any warranty for rotary grippers that

have not been replaced or repaired by Afag!

CAUTION

Risk of injury when removing the rotary grippers due to uncontrolled

movements of the grippers!

When disassembling the rotary grippers from a system, there is a danger of

uncontrolled movements.



Disconnect the media supply (electrics, pneumatics) before removing the

rotary grippers!



Disassembling should only be carried out by qualified personnel!



Only remove the rotary gripper when the control unit is switched off and

secured!

Summary of Contents for DG 16



















































Search results

Summary of Contents for DG 16

Reviews:

Related manuals for DG 16

Brands by name

Popular brands

Afag DG 16, Assembly & Operating Instructions

Search results

Summary of Contents for DG 16

Reviews:

Related manuals for DG 16

Brands by name

Popular brands