Decommissioning, disassembly, disposal
Assembly instructions EN
DG 16
Edition 07/2020
Rev. 3.0
45–50
10 Decommissioning, disassembly, disposal
The rotary grippers must be properly dismantled after use and disposed of in an
environmentally friendly manner.
10.1 Safety instructions for decommissioning, dismantling and disposal
Also observe the safety instructions in
Chapter 2 „Safety instructions“ in
this manual.
10.2 Decommissioning
If the rotary grippers are not used for a longer period of time, they must be
properly commissioned and stored as described in
Chapter 4.5.
10.3 Disassembly
The rotary grippers may only be dismounted by qualified personnel.
WARNING
Risk of injury due to improper decommissioning, disassembly and
disposal!
Improperly carried out activities can result in considerable material damage
and serious injury.
The operator must exercise due care and only use specially trained and
qualified personnel for this work.
CAUTION
Risk of injury due to uncontrolled movements of the rotary grippers!
When disassembling the rotary grippers from a system, there is a danger of
uncontrolled movements.
Disconnect the media supply (electrics, pneumatics) before removing the
rotary grippers!
Disassembling should only be carried out by qualified personnel!
Only remove the rotary gripper when the control unit is switched off and
secured!
