Transport, packaging and storage
Assembly instructions EN
DG 16
Edition 07/2020
Rev. 3.0
23–50
4 Transport, packaging and storage
This chapter provides information regarding proper transport, packaging and
storage of the rotary grippers.
4.1 Safety instructions for transport
Also observe the safety instructions in
Chapter 2 „Safety instructions“ in
this manual.
4.2 Scope of supply
The rotary grippers are supplied with an operating and assembly manual and a
safety data sheet (see scope of supply below).
Fig. 6
Scope of supply rotary gripper DG 16
[Unt]
DG 16
DG 16 (zero position 90°)
1 x
Module rotary gripper DG 16 Mod. rotary gripper DG 16 (zero p. 90°)
2 x
Centering bushing ø 7x3
Centering bushing ø 7x3
2 x
Socket head screw M4x16
Socket head screw M4x16
2 x
Socket head screw M4x35
Socket head screw M4x35
2 x
Set screw M3x3
Set screw M3x3
CAUTION
Danger of injury when unpacking the rotary grippers!
The rotary grippers are packed in the original packaging (cardboard box). If
handled incorrectly, the rotary gripper module may fall out of the box when
unpacked and cause limb injuries.
Carefully unpack the rotary gripper.
