66
S
COOPY
+ S - User Manual
4.4.6.
About
sub-menu
This sub-menu provides a list of data about the identification and status of the unit. Scroll the list using
the arrows and access all the information:
Local IP
: IP address of the active IP interface (Ethernet or mobile depending on the current
one).
Public IP
: public IP address, when S
COOPY
+ S accesses the Internet through a NAT router. This
address is possibly detected thanks to a STUN server (configured via the "AoIP parameters"
menu, see in 4.4.1).
NAT Type
: in addition to the above public IP, thanks to STUN S can detect the type of
NAT.
Version
: S
COOPY
+ S firmware version global identification. Along with the unit serial number
(shown on the label stuck on the bottom of the unit, and also further in this "
About
" menu),
this is part of the essential information to provide whenever you contact AETA for support or
maintenance issues.
AoIP Version
: version number for the audio via IP module.
SW Build
: date of generation of the firmware.
MAC Address
: of the main (integrated) Ethernet interface.
Ethernet Setup
: current setting of the main Ethernet interface (10 or 100 Mbit/s, half/full
duplex…).
SIP Registrar
: address or domain name of the SIP server, if one is configured.
SIP Status
: shows whether the codec is registered on the SIP server.
This information is also visible on the base screen ("S" indicator).
Serial Number
: shows the serial number of the unit.
Remote Access Status
: if you have activated remote access (or remote assistance), you can
check here if the connection to the service is successful.
Battery level:
voltage of the batteries inside the device.
About
Loca l IP
Publ i c IP
NAT Type
Vers i on
AoIP Vers i on
SW Bui l d
MAC Addres s
Ethernet Setup
SIP Us er
SIP Regi s tra r
SIP Sta tus
Seri a l Number
Remote Acces s Sta tus
Ba ttery Level
