S
COOPY
+ S - User Manual
101
5.10.4.
"
R
ESET
" page
This page provides two functions: clearing the settings and/or memories/profiles recorded in the unit,
and rebooting the unit.
You can reset the unit completely or only clear a category of data; the available options are:
"
Factory Reset
": all parameters are brought back to their default setting, and all memories (call
profiles, presets, snapshots) are deleted.
Afterwards, the unit automatically reboots to ensure
the parameters are properly reset.
“
Reset Settings
”: all parameters are brought back to their default setting, but all memories are
kept: call profiles, presets and snapshots.
"
Reset CallProf
": call profiles and presets are cleared from the memory.
"
Reset Snapshots
": all snapshots are cleared from the memory.
"
Factory SIP Accounts
"
1
: reloads the credentials for the "factory" SIP account of the unit, and
registers the unit on the AETA SIP server.
The page also allows you to reboot the unit by remote, clicking the "
Reboot
" button. The device is
actually reboot when you confirm by clicking "OK" in the dialog box which then shows up
2
. This is
equivalent for S
COOPY
+ S to an off/on power cycle. Of course, you must wait for the return to the normal
operative state before regaining control via the html pages.
1 This feature may not be available on older units.
2 If you mistakenly clicked the "Reboot" button, it is still possible to cancel this: close the page without clicking "OK" (do not hit the computer’s
Esc
key neither).
