AETA Scoopy+ S User Manual Download Page 102

Page: 102 / 136

COOPY

+ S - User Manual

5.6.5.

POTS

ARAMETERS

" page

This page is only visible for units equipped with the POTS option.

See more details on the parameters in

4.4.1, POTS Parameters.



Remember to

save the changes

, clicking the "Save" button!

5.6.6.

OBILE

ARAMETERS

" page

This page is only visible for units equipped with the "HD-4G Mobile" option. See more details on the
parameters in 4.4.1, Mobile Parameters. You cannot access all settings unless the PIN code has been
entered (otherwise the view is partial only).



If you have plugged a USB mobile access device, it is also assigned a specific parameter page.



Remember to

save the changes

, clicking the "Save" button!

Summary of Contents for Scoopy+ S









































































































































Search results

Summary of Contents for Scoopy+ S

Reviews:

Related manuals for Scoopy+ S

Brands by name

Popular brands

AETA Scoopy+ S, User Manual

Search results

Summary of Contents for Scoopy+ S

Reviews:

Related manuals for Scoopy+ S

Brands by name

Popular brands