Items needed to complete:
Hardware:
•
Motor with mounting bolts and prop –
Recommend:
•
Hacker A3016M with 10 x 5 APC-E
prop and a Hacker X-30 speed control
•
AXI 2814/10 motor with prop adaptor (#
MJ 4703) with 8 x 6 APC-E prop and
Castle Creation 25 amp speed control
•
Himax 2820 with 10 x 5 APC-E prop and
Castle Creation 25 amp speed control
•
Battery 3 cell 2000-2500mah
LiPoly
•
2 x aileron mini servos – Recommend Hitec
HS-55 servos
•
1 x rudder mini servo – Recommend Hitec
HS-55 servo
•
1 x elevator mini servo – Recommend Hitec
HS-55 servos
•
1 x 6” servo extension
•
2 x 12” servo extensions
•
1 “Y” harness
•
4 Ch minimum receiver, feather or micro size
7
Tools:
•
Modeling knife
•
Electric drill and selection of bits
•
Phillips screwdriver
•
Needle nose pliers
•
Allen wrenches US and Metric.
•
Scissors
•
Tweezers
•
Wire Cutters
•
T pins
•
Medium sandpaper
•
Ruler and tape measure
•
Pen, pencil or felt tipped marker
•
Rubbing alcohol
•
Paper towels
•
Masking tape
•
Waxed paper
•
Hobby iron
•
Hobby heat gun
•
Epoxy mixing cups, sticks, tooth picks
Adhesives:
•
15-30 Minute epoxy
•
Thin CA
•
CA kicker (optional)
•
Blue Lock Tite
•
Double sided foam mounting tape
