21. Tape the trailing edge of the aileron to the wing
root as shown.
22. First slide the push rod through the servo arm
easy link and then install pushrod through the
middle hole in the control horn. Install the nylon
pushrod keeper onto the end of the push rod as
shown.
23. Ensure the servo arm is centered in the neutral
position and then tighten the easy link screw
against the wire pushrod.
24. Use wire cutters to cut off the excess aileron
pushrod wire. Leave approximately 1/4" to 3/8”
extended out of the easy link for any future
adjustments.
14
