72
1. Aeroworks has included the new CG Buddy
with the 100cc Edge 540. This handy tool will
allow the builder to balance the airplane without
the need for an assistant.
2. Gather the CG buddy as shown below:
Note:
50cc Edge shown in following pictures.
Steps will be the same.
Center Of Gravity– CG Buddy
3. Slide wings away from fuse and install the CG
Buddy on the wing tube and front rotation dowel as
shown. The cable attachment should be on the top
side of the wing. Make sure the CG Buddy is se-
curely latched to the wing tube and dowel before
moving further.
4. Slide wing back against the fuse as shown be-
low.
5. Install CG Buddy on the opposite wing using
the same methods described above.
6. Attach loop to cable attachment as shown be-
low.
7. Slide wing back against fuse insuring both
wings are pushed firmly against fuse.
