18
8.
Plug the servos into the receiver and turn on.
Ensure servos are centered and the servo arms
are parallel to the aileron hinge line. Adjust
the length of the pushrods so that the aileron is
at the neutral position when the servo arms are
parallel to the aileron hinge line. Ensure all
servos do not fight each other at center or
either end point at full deflection. Take advan-
tage of servo programmers and match boxes
available today to achieve best results. This
will help keep servos from binding and
causing possible aileron flutter.
7.
Install servo arm to pushrod as shown below.
9.
Finished wing panel shown below, repeat steps
for remaining wing panel.
