67
5. Gather the (2) 4-40 and (2) 6-32 cowl mounting
bolts and (4) #6 small rubber backed washers.
Mount the cowl using the cowl mounting bolts
and rubber backed washers. The rubber backed
washers are to prevent the fiberglass cowl from
cracking and keep bolts from coming loose from
normal engine vibration.
7. Secure bottom section of cowl with
4-40 x 16mm button head bolts and #6 bonded
washers.
6. Secure top section of cowl with 6-32 x 16mm
hex head bolts and #6 bonded washers.
8. Slide the rubber backed washers on the hatch
mounting bolts and insert bolts through the hatch
mounting holes and into the fuse blind nuts.
Tighten snugly but do not over tighten and crush
the hatch or the fuse sides.
