45
Ignition module Installation
1. Gather the supplied mounting hardware to be
used. Included in the kit are large and small ny-
lon ties, One Wrap Velcro ties, and foam rubber
pads as shown.
2. Gather the ignition module, ignition battery,
switch, and mounting hardware as shown.
3. Position the ignition module inside the engine
box to allow both of the spark plug leads to exit
and properly connect to the engine without ex-
cess tension or chafing. Mark the location for the
nylon tie mounting holes.
4. Use a 1/4” drill bit to drill the nylon tie mount-
ing holes as shown.
IGNITION INSTALLATION
