13
Aileron Servo Installation
1. The ailerons have been pre-hinged and
glued
to
the wing panels and are ready for flight. No
other steps are necessary for hinging. Clear
Covering is supplied for sealing the hinge gaps if
desired. However, due to the precisely aligned
and minimal hinge gap this step is optional.
Gather the following items for each wing
panel:
•
(2) Aileron Servos 172 in./oz torque ea re-
quired
•
(1) 11” Y harnesses:
Optional
See below
•
(1) 24” servo extension
As shown below to begin the servo installa-
tion.
Note:
A 6” extension will also be needed per wing
when connecting aileron servos to receiver.
Note:
If using a 12+ channel radio, match boxes, or
power expander with mixing capabilities it
will not be necessary to use a Y harness.
WING ASSEMBLY
2. Layout the servos, extensions and Y harness on
the wing to test fit the installation and ensure
servo leads are the correct length.
Minimum recommended servo:
172 in. oz. / Metal Geared / Digital
3. Attach the 6” extension to the servo lead and
secure with Aeroworks Safety Clip. Ensure the
connectors will not come apart from vibration or
light tension.
Safety Clips
Available
from
Aeroworks
