38
Engine Installation
1. The 100cc Edge 540 will accept a wide range of
engine types. Illustrations for a DA-100
installation are provided below. Gather the en-
gine, mounting hardware as shown below.
Note:
Engine mounting hardware is
Not Supplied
ENGINE INSTALLATION
2. 6mm Machined Aluminum spacers are included
to set the proper stand off distance for your en-
gine.
3. Locate the laser cut engine mounting template
for the DA-100.
Note:
If other engines are used the templates may
be modified to fit you engine selection. Center
your engine over the laser marked thrust lines
on the template. Mark and drill the engine
mounting hole locations for your engine.
Follow the next steps for mounting your
engine
4. Align mounting template with firewall and tape
in place.
