Aerotech XC2e, Hardware Manual, Page: 76 / 92

4.1. DIN Rail Mounting
DIN Rail Mounting Procedure:
1. Mount the DIN rail clip to the XC2e. The clip and #6-32 x 1/4 flat head screws are included in the
XC2e-DIN clip kit.
2. Cut the DIN rail so that one complete mounting hole extends beyond the last component at each
end.
3. Secure the DIN Rail to the mounting surface with #10-32 screws spaced every six inches.
NOTE: Do not install the DIN rail to the mounting surface with the components already attached.
4. Install all components on to the DIN rail.
Table 4-2: Mounting Parts
Aerotech P/N
DIN Rail EAM00914
DIN Rail Clip Kit XC2e-DIN
Figure 4-1: Din Rail Clip Dimensions
4.1. DIN Rail Mounting XC2e Hardware Manual
76 www.aerotech.com