Aerotech XC2e, Hardware Manual, Page: 40 / 92

2.3.1.1. Square Wave Encoder
The XC2e accepts RS-422 square wave encoder signals. The XC2e will generate a feedback fault if it
detects an invalid signal state caused by an open or shorted signal connection. Use twisted-pair wiring
for the highest performance and noise immunity.
Table 2-14: Square Wave Encoder Specifications
Specification Value
Encoder Frequency 10 MHz maximum (25 ns minimum edge separation)
x4 Quadrature Decoding 40 million counts/sec
Figure 2-12: Square Wave Encoder Schematic (Feedback Connector)
2.3.1. Primary Encoder Inputs XC2e Hardware Manual
40 www.aerotech.com