Aerotech Soloist MP 10, Hardware Manual

Page: 32 / 94

32 Chapter 2 www.aerotech.com
2.1.4. Minimizing Conducted, Radiated, and System Noise
The Soloist MP generates conducted (AC line) and radiated noise. Conducted emissions are minimized by
using line filters and should be located as close to the drive as possible for maximum effectiveness. User
connections to the product must be made using shielded cables with metal D-style connectors and back
shells. The shield of the cables must be connected to the metal back shell in order for the product to conform
to radiated emission standards.The Soloist MP is a component designed to be integrated with other
electronics. EMC testing must be conducted on the final product configuration.
Ferrite beads can be used on the motor leads to reduce the effects of PWM noise.
Table 2-7: Ferrite Noise Suppression Part Numbers
Wire Size Aerotech P/N Third Party P/N
13.3 mm
2
(#6 AWG)
N/A #2643626502 Elna Fair-Rite Products
8.3 mm
2
(#8 AWG)
ECZ00285 #2643626502 Elna Fair-Rite Products
2.0 mm
2
(#14 AWG)
EIZ01027 #2643002402 Elna Fair-Rite Products
1.3 mm
2
(#16 AWG)
EIZ01025 #2643250402 Elna Fair-Rite Products
0.8 mm
2
(#18 AWG)
EIZ01001 #2673000801 Elna Fair-Rite Products
Soloist MP Installation and Configuration