Ndrive HP 10/20/30 User’s Manual
Options
www.aerotech.com
4-5
Figure 4-4 is an example of a 24 VDC Brake connected to TB301. In this example, JP1-
A and JP1-B must be configured. If JP1-A and JP1-B are configured to 1-3 then J207
pins 13 and 25 will be unused. If JP1-A is set 1-2 and JP1-B is set 3-4, a connection
between pins 13 and 25 of J207 is required. In this case, J207 functions as an interlock to
prevent the Brake from releasing if the Motor Feedback connector is not connected.
Figure 4-4.
Brake Connected to TB301
The user is responsible for providing fuse protection for
the Brake circuit.
Figure 4-5 is an example of a 24 VDC Brake connected to the Motor Feedback connector
(J207). In this example, the external 24 VDC power source is connected to TB301. Also
note that JP1-A is set 1-2 and JP1-B is set 3-4.
Figure 4-5.
Brake Connected to J207
The user may reconfigure the connections for the brake,
such that the positive supply lead is switched by the relay
instead of the supply common.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
